CAP NAILERS

FAST. CONSISTENT. MANEUVERABLE.

CN100 CAP NAILER

The CN100 is the best practice for securing synthetic underlauments, roofing felts, and housewrap. This high production tool shoots plastic caps for residential roofing and sidewall applications, and passes 2012 IRC Building Codes.

  • Speed: 5 cap nails per second (max. cycle rate/second)
  • Tool Weight: 4.9lbs.
  • Fastener Capacity: 200 caps / 200 nails
  • Cap Type: Full 1” collated plastic caps
  • Fastener Type: Full round head; electro-galvanized ring shank
  • Fastener Length: 1” x .083

The STINGER® CN100 is designed for use with 1" STINGER® NailPac® only (#0136260)

Download Owner's Manual
Download Warranty

#0136250

Hitachi NV50AP3

Discontinued Spring 2015

Fasteners still available here

RT3 CAP NAILER

The RT3 with its improved balance and cap feeding system is the ideal pneumatic cap tool for securing base sheet to wood decks. Just hold the trigger and start walking--the job is done in a fraction of the time. Steel cap nails are pneumatically driven at 6", 9" or 18", and there’s no need to hammer down raised staples as with base taping. You won’t find a faster, easier, or better delivery system anywhere.

  • Spacing: Automatic 6”’, 9”, or 18” or manual spacing
  • Speed: 9 times faster than hand drive
  • Fastener Capacity: 1500 caps / 1500 nails
  • Cap Type: Full 1” collated steel caps
  • Fastener Type: Full round head; electro-galvanized ring shank
  • Fastener Length: 1-¼” x .083

The STINGER RT3 is designed for use with 1-1/4" STINGER RolPac (#0136072)

Download Owner's Manual

#0136005